The diaphragm pump outlet liquid contains a large number

Non-sudden high water Surface Pumps Manufacturers. When the water filling port turns over a little and the engine temperature is low before and high, it indicates that the water distribution pipe is damaged or blocked and should be replaced in time. In short, there are many reasons for the overheating of the electric diaphragm pump engine. If a radiating pipe is severely broken, the two ends can be clamped and blocked. 2. Check if the pump body and pipeline leak. Reasons for the high temperature of the electric diaphragm pump engine: 　　1.

Fourth, the diaphragm pump outlet liquid contains a large number of bubbles 1. If the diaphragm pump fails, you can use these methods to check first. 2. Reduce the running speed of the pump to adjust the viscosity and concentration of the liquid. Please replace the ball and seat with suitable materials. If everything is normal and the engine is still overheating, check the fan air volume. 1. 2. If it is inaccurate or out of order, replace it; then check whether the water tank is short of water, and whether the water inlet pipe and radiator are broken or leaking.

The electric diaphragm pump is running but the flow rate is too low. Under normal conditions of the cooling system, the engine is still overheating, the reasons for use should be considered. DBY electric diaphragm pump cooling system leaks or lacks cooling water; 　　2. First, check whether the water temperature meter is out of order. If the water filling port does not turn over, the appearance of the cooling system and the mechanical parts of the engine should be carefully inspected and analyzed. A slight water leak was found during work, which can be blocked with soap and repaired after parking. The cooling system has too much scale and poor heat dissipation effect; 　　

4. If it fails, replace it. 3. The leaking part of the radiator can be repaired by soldering. The valve ball will expand. Inaccurate or malfunctioning water temperature indicator; 　　3. Traces of injury. First check whether the radiator is overheated. The emergency method is to put a properly large spring support in the collapsed pipe.